How to give car leaf plate sheet metal - paint rapid repair technical school of laitway car
PubTime:2018-04-26
The following gives you a brief introduction of the auto leaf sheet metal process:
1. First open the engine front cover, remove the front bumper fixing screw, and remove the front bumper and leaf plate lining.
2. Use a crowbar to push out the hollow part of leaf plate.
3. Use hammer to manually smash the deformed part back to the original shape of the leaf plate and crack it at the same time.
4. After finishing the deformation part, check the repair effect repeatedly to ensure it is consistent with the prototype.
5. Grind the bruise with grinder.
6. Check the shaping effect after grinding, and adjust immediately if there are defects.
7. After the inspection is correct, the sheet metal work is finished here, and the vehicle can be transferred to the paint department for finishing treatment.
